60GHz mmWave PtMP Radio Link
ZWR-V626-C42X / ZWR-V626-C43X
- Point to Multi-Point Link
- Multi-Gigabit Data Rates
- 2.5 Gbps Ethernet
- Low Latency Transmissions
- Passive PoE UP to 30W
- IPX6 Waterproof Rating
Zinwell’s ZWR-V626 is an ideal solution of a 60GHz point to multi-point radio which is able to support multi-gigabit per second data rates. It can easily replace fiber for ultra-high-speed data and low latency transmissions. Rapid installation and in most markets no spectrum permits are needed.
The ZWR-V626 can support up to 1 kilometer data transmission with 1Gbps. Compliant with IPX6 waterproof rating, ZWR-V626 can operate in severe environment and brings network connection from core to edge.
Multi-Gigabit Data Rates
2.5 Gbps Ethernet
Low Latency Transmissions
Passive PoE Up to 30W
IPX6 Waterproof Rating
Wireless Data Transmission
Point to Multi-Point Wireless Network
60GHz Wireless Fiber
A primary wireless link radio delivering over 1 Gbps connectivity over license and noise free 60GHz mmWave band.
| System | |
|---|---|
| CPU and WLAN Baseband | Qualcomm “Cypress” IPQ6010 |
| 2.5G LAN1 Ethernet PHY IC | Qualcomm “Napa” QCA8081 |
| 2.5G LAN2 Ethernet PHY IC | Qualcomm “Napa” QCA8081 |
| Power Management | MP5496 |
| RAM | DDR4 SDRAM 1 GB |
| FLASH RAM |
eMMC 4 GB SPI NOR FLASH 4 MB |
| Flash RAM for 60GHz | SPI NOR Flash 1MB |
| Antenna | |
| WLAN 60GHz | 32-element PCB integrated antenna x1 |
| Scan Range | ±45° azimuth, ±20° elevation |
| Networking | |
| Ethernet |
LAN1: One 10/100/1000/2500 Mbps RJ-45 supports PoE In LAN2: One 10/100/1000/2500 Mbps RJ-45 supports PoE Out (Passive) |
| Supports Standard | |
| WLAN | IEEE 802.11ad Compliant |
| Encryption | WPA, WPA2 |
| Ethernet |
10BASE-Te/100BASE-TX/1000BASE-T/2500BASE-T IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz Compliant IEEE 802.3az Energy Efficient Ethernet (EEE) compliant |
| Power | |
| Input Voltage ((±5%) | PoE 48 VDC ±5% |
| Power Rating | Passive PoE+ 30W |
| Power consumption | Max. 25W |
| Power Consumption |
Max. ~30 W with PoE out Max. ~17W without PoE out |
| Interface | |
| LED Indicator | Power, Ethernet, Wi-Fi 60G |
| Dimensions | |
| Chassis Size | 208.5 x 112 x 40mm |
| Ambient | |
| Operating Temperature | -30˚C to +60˚C (TBC) |
| Storage Temperature | -40˚C to +85˚C (TBC) |
| Relative Humidity | 10% to 90% (Non-Condensing) |
| Waterproof | IPX6 |
Specifications are subject to change without notice
| System | |
|---|---|
| CPU and WLAN Baseband | Qualcomm “Cypress” IPQ6010 |
| 2.5G LAN1 Ethernet PHY IC | Qualcomm “Napa” QCA8081 |
| 2.5G LAN2 Ethernet PHY IC | Qualcomm “Napa” QCA8081 |
| Power Management | MP5496 |
| RAM | DDR4 SDRAM 1 GB |
| FLASH RAM |
eMMC 4 GB SPI NOR FLASH 4 MB |
| Flash RAM for 60GHz | SPI NOR Flash 1MB |
| Antenna | |
| WLAN 60GHz | 64-element PCB integrated antenna x1 |
| Scan Range | ±15° azimuth, ±20° elevation |
| Networking | |
| Ethernet |
LAN1: One 10/100/1000/2500 Mbps RJ-45 supports PoE In LAN2: One 10/100/1000/2500 Mbps RJ-45 supports PoE Out (Passive) |
| Supports Standard | |
| WLAN | IEEE 802.11ad Compliant |
| Encryption | WPA, WPA2 |
| Ethernet |
10BASE-Te/100BASE-TX/1000BASE-T/2500BASE-T IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz Compliant IEEE 802.3az Energy Efficient Ethernet (EEE) compliant |
| Power | |
| Input Voltage ((±5%) | PoE 48 VDC ±5% |
| Power Rating | Passive PoE+ 30W |
| Power consumption | Max. 25W |
| Power Consumption |
Max. ~30 W with PoE out Max. ~17W without PoE out |
| Interface | |
| LED Indicator | Power, Ethernet, Wi-Fi 60G |
| Dimensions | |
| Chassis Size | 208.5 x 112 x 40mm |
| Ambient | |
| Operating Temperature | -30˚C to +60˚C (TBC) |
| Storage Temperature | -40˚C to +85˚C (TBC) |
| Relative Humidity | 10% to 90% (Non-Condensing) |
| Waterproof | IPX6 |
Specifications are subject to change without notice