Zinwell’s 60GHz mmWave is an ideal solution of a 60GHz point to multi-point radio which is able to support multi-gigabit per second data rates. It can easily replace fiber for ultra-high-speed data and low latency transmissions. Rapid installation and in most markets no spectrum permits are needed.
The 60GHz mmWave can support up to 3 kilometer data transmission with 1Gbps. Compliant with IPX6 waterproof rating, 60GHz mmWave can operate in severe environment and brings network connection from core to edge.
Multi-Gigabit Data Rates
2.5 Gbps Ethernet
Low Latency Transmissions
Passive PoE Up to 30W
IPX6 Waterproof Rating
Wireless Data Transmission
Point to Multi-Point Wireless Network
60GHz Wireless Fiber
A primary wireless link radio delivering over 1 Gbps connectivity over license and noise free 60GHz mmWave band.
10BASE-Te/100BASE-TX/1000BASE-T/2500BASE-T
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz Compliant
IEEE 802.3az Energy Efficient Ethernet (EEE) Compliant
LAN1: One 10/100/1000/2500 Mbps RJ-45 supports PoE In
LAN2: One 10/100/1000/2500 Mbps RJ-45 supports PoE Out (Passive)
eMMC 4 GB
SPI NOR FLASH 4 MB
Max. ~30 W with PoE out
Max. ~17W without PoE out
*Specifications are subject to change without notice
10BASE-Te/100BASE-TX/1000BASE-T/2500BASE-T
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz Compliant
IEEE 802.3az Energy Efficient Ethernet (EEE) Compliant
LAN1: One 10/100/1000/2500 Mbps RJ-45 supports PoE In
LAN2: One 10/100/1000/2500 Mbps RJ-45 supports PoE Out (Passive)
eMMC 4 GB
SPI NOR FLASH 4 MB
Max. ~30 W with PoE Out
Max. ~17W without PoE Out
*Specifications are subject to change without notice
LAN1: 10/100/1000 Mbps RJ-45 (Support PoE In)
LAN2: 10/100/1000 Mbps RJ-45 (Support PoE Out)
LS: ±4.5°
LL: ±2.5°
Up to 30 W (PoE Out)
Max. ~18 W without PoE out
LS:153 x 164 x 122 mm (Ultra-Slim Model)
LL:153 x 164 x 177 mm (Standard High-Performance Model)
*Specifications are subject to change without notice